Benro Video Tripods>A373F Aluminum Single-Tube Tripod with S8Pro Fluid Video Head

Benro S8Pro Tripod System Overview

Benro’s A373F Aluminum Single-Tube Tripod is the perfect combination of versatility and convenience. It features a 75mm bowl and includes a 75mm half-ball adapter, paired with the S8Pro Fluid Video Head. The head supports up to 7.98 kg loads and has a 75mm flat base with a 3/8″-16 thread underneath, allowing it to be moved from the tripod to sliders, jibs and other support gear. The system is compact and has 2-stage/3-section single-tube legs with both rubber and spiked feet, making it suitable for use on almost any surface. Each leg of the tripod is independently adjustable into three positions, allowing you to set up quickly and easily.

The S8Pro head offers 7+0 steps of counterbalance and continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°. With the head attached, the tripod reaches a maximum height of 162.56 cm. The minimum height is 32.51 cm, which is a low height that isn’t too common among most tripods. At this height, you can set up the tripod for low-angle shots.

Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won’t slip out if you move it in either direction too much. Two camera screws are supplied—1/4″-20 and 3/8″-16-that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there’s a 3/8″-16 threaded hole on each side of the head to which you can secure articulating arms.

S8Pro Fluid Head

• 44.70 kg payload
• 75mm flat base with a 3/8″-16 thread
• Can also be mounted directly on most sliders, jibs, and monopods
• 7+0 steps of counterbalance
• Continuous pan and tilt drag
• Independent pan and tilt locks
• +90/-75° tilt range
• 360° pan range
• Made of magnesium and aluminum
• Rosette adapters on the left and right side for attaching the included pan bar
• Sliding camera plate with safety lock
• 1/4″-20 and 3/8″-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
• Two 3/8″-16 threaded holes for accessories

A373F Tripod

• 75mm bowl tripod with a 75mm half-ball adapter
• Maximum height of 162.56 cm with the S8Pro attached
• Low-angle minimum height of 32.51 cm
• Single-tube legs independently adjustable into three positions
• Spiked and rubber feet
• Flip leg locks
• Aluminum construction